EVP26-12-BB Battey12V26AH
B.B. Battery EVP26-12 12V 26Ah VRLA battery, with a high cycle life of up to 1700 cycles, maintenance-free and leak-proof, suitable for UPS, medical equipment, wheelchairs, golf carts, etc., 5-7 years service life, efficient and reliable power solution
Buy Now
Product Features
- Maintenance free(no water topping-up required)
- No free acid(Non-spillable battery)
- The battery is designed for high power & high cyclic usage
- Can be used in any orientation(excluding used inverted)
- Absorbent Glass Mat technology for efficient gas recombination
- Filtered with explosion proof filter
- Flame-arrestor is installed to ensure safety
Application Scenarios
- Uninterruptible power supplies
- Medical equipment
- Lawnmowers
- Electro bikes and scooters
- Golf cars
- Telecommunication facilities
- Data processing centres
- Electric vehicles
- Wheelchairs
- Floor cleaning equipment
Product parameters
- ModelEVP26-12
- Voltage12 V
- Nominal Capacity (Ah) 20-hour rate26
- Nominal capacity (Ah) 5-hour rate22.1
- Nominal capacity (Ah) 30-minute rate16.3
- Weight (kg)10
- Weight (lb)22.05
- Standard terminal typeB1
- Standard terminal position7
- Optional terminal typeT2 I1
- Optional terminal position9
- Length (mm)175
- Length (inches)6.89
- Width (mm)166
- Width (inches)6.54
- Height (mm)125
- Height (inches)4.92
- Total height (mm)125
- Total height (inches)4.92
Product details
B.B. Battery EVP series VRLA batteries are produced in 12-volt units, with a capacity range of 7 to 70Ah, are low-maintenance lead-acid service batteries, and have high cycle life. As one of the models in this series, EVP26-12 is designed for high power and high cycle use, adopts absorbent glass mat technology to achieve efficient gas recombination, is maintenance-free without adding water, and has no free acid, belongs to a leak-proof battery, and can be used in any direction (except inverted).The outer casing is made of opaque impact-resistant ABS plastic. The battery cover is firmly connected to the outer casing. The terminal area is sealed. Terminal designs vary according to series and types. The standard terminal type for EVP26-12 is B1, position 7, and the optional terminal type is T2I1, position 9. The battery cover has six holes, through which electrolyte is filled during production, and then a pressure relief valve is installed. The pressure relief valve is made of non-combustible material to ensure a high level of fire and explosion safety. Both the positive and negative plates are coated with a paste coating, and the battery can be installed in horizontal and vertical positions.In terms of performance advantages, EVP26-12 offers high power output. It has a high cycle ability of up to 1700 cycles. The expected service life under normal operating conditions is 5-7 years. The capacity covers different discharge rates such as C2, C5, C8, C10, C20, C100 according to the Eurobat general standard. Its rated capacity is 26Ah at 20-hour rate, 22.1Ah at 5-hour rate, and 16.3Ah at 30-minute rate. The weight is 10 kilograms (22.05 pounds). In terms of dimensions, the length is 175 millimeters (6.89 inches), the width is 166 millimeters (6.54 inches), and both the height and total height are 125 millimeters (4.92 inches).EVP26-12 is widely used in various scenarios such as uninterruptible power supplies, telecommunication facilities, medical equipment, wheelchairs, lawn mowers, electric bicycles, scooters, and golf carts, and is an ideal power source for various equipment.
