2BPzB110-BSType55Ah bb batteryTraction battery
B.B. Battery BS Tractor Series 2BPzB110 Model 55Ah battery is specially designed for industrial power applications, offering excellent deep cycle performance and long service life. It uses sturdy tubular plates and microporous separators to ensure reliability and durability. Equipped with leak-proof integrated terminals, flip plugs with liquid level markings, and optional automatic water replenishment and electrolyte circulation systems, it effectively prevents stratification and optimizes charging. Suitable for forklifts, tractors, AGVs, and solar systems, etc., improving operating time and productivity. Conforming to IEC standards and manufactured in ISO 9001 certified factories, it is an ideal energy storage solution for high-performance material handling and electric vehicles.
Taobao store
WeChat procurement
Product Features
- Terminals, Grommet and Lid Equipped with special design and integrated without deviation ensures that no electrolyte leak from the cell.
- Top plugs Flip top plugs with electrolyte level markings are fitted. Allow adequate escape of charging gasses and provide a safe anti-surge baffle for the electrolyte during operation.
- Water refill system The aqua level water refill system makes it possible to top up all the cells from one central point through an integrated system. This automatic system ensures the optimum filling level and also allows the measurement of electrolyte specific gravity. The aqua level kit can be expertly fitted at the factory and on-site.
- Electrolyte circulation An optional electrolyte circulation system is Available. Using air-flow principle, consists of a pipe system which creates a circulating air stream inside the cell box. This system prevents electrolyte stratification and the battery charging is optimized.
- APPLICATIONS BPzB batteries are widely recognized as the superior stored electrical energy solution for material handling equipment, road vehicles, tow tractors and other electric vehicles with high energy/ deep cycle requirements.
- BENEFITS Higher running time and battery availability giving increased productivity Optimized design benefit less alloy corrosion giving longer battery life Increased active material surface and utilization gives greater volumetric energy density Product manufactured with a plant approved to quality management standards ISO 9001. Product conforms to IEC 60254.
- Strengthened rib design to maintain structural integrity
Application Scenarios
- olk Lift
- Pallet Jack
- Tow Tractor
- Automated Guided Vehicle
- Solar power generation system
- Electrical supply network and power industry
- Street lighting and traffic lights
- Electric vehicles
- Data processing centres
- Floor cleaning equipment
Product parameters
- Model2BPzB110 - BS Type 55Ah
- Battery Capacity Ah(C5)110
- Dimensions (mm) Length158
- Dimensions (mm) Width46
- Dimensions (mm) Height(1)413
- Dimensions (mm) Height(2)401
- Dimensions (mm) Height(3)-
- Weight with electrolyte (±5%) kg7.3
- Weight without electrolyte (±5%) kg5.5
Product details
In the field of industrial power applications, a reliable energy solution is the core to ensuring the continuous and efficient operation of equipment. As a member of B.B. Battery's traction series, the 2BPzB110 - BS Type 55Ah battery is specifically designed to meet various stringent requirements ranging from light - load to heavy - duty operations. This series of batteries, with its optimized positive and negative plate design and advanced production technology, offers a service life of up to 10 years while covering a wide capacity range from 64 to 1296 ampere - hours (Ah). The specific capacity value depends on different discharge rate standards such as C2, C5, C8, C10, C20, and C100, ensuring performance matching and energy efficiency under different working conditions.
The excellent performance of this battery stems from its robust tubular positive plate structure, which is made of die - cast antimony lead and lead dioxide, endowing the battery with excellent deep - cycle capability. The negative plate adopts a flat - attached design, combined with an elastic, high - strength polyester separator and a microporous sleeve separator that effectively prevents short circuits, jointly constructing a stable and efficient internal environment. The battery case and cover are made of impact - resistant and high - temperature - resistant materials and are tightly sealed by heat - sealing technology, fundamentally preventing electrolyte leakage and enhancing overall safety and reliability.
Specifically for the model 2BPzB110-BS, its nominal capacity is 110Ah (C5 rate). Its compact physical dimensions (length 158mm, width 46mm, height 401 to 413mm) allow it to flexibly fit into various equipment spaces. The battery weighs approximately 7.3 kg with electrolyte and about 5.5 kg without electrolyte, achieving a good balance between energy density and portability. These carefully designed features work together to increase the surface area and utilization rate of the active material, thereby enhancing the battery's volumetric energy density.
In terms of actual functional details, multiple designs of this battery are aimed at improving user experience and maintenance convenience.Its terminals and cover use a special integrated and unbiased design, combined with high-quality washers, ensuring excellent sealing performance. A flip-type plug with electrolyte level markings is installed on the top, which allows the gas generated during charging to fully escape and serves as a safe splash guard during operation. Notably, its Aqua Level water replenishment system allows users to easily replenish water for the entire battery pack through an integrated central point. This system can automatically maintain the optimal liquid level and facilitate the measurement of electrolyte specific gravity. The relevant kit supports professional installation at the factory or on-site.In addition, users can also optionally equip an electrolyte circulation system. This system, based on the principle of air flow, promotes the electrolyte to circulate within the battery tank through built-in pipes. This function can effectively prevent electrolyte stratification, optimize the charging process, and thereby further extend the overall battery life.
These technical advantages directly translate into significant usage benefits. Longer operating time and higher battery availability directly enhance the productivity of equipment. The optimized design reduces alloy corrosion, combined with high-quality manufacturing—products are produced in factories certified by the ISO 9001 quality management system and comply with relevant international standards such as IEC 60254—together ensuring the battery's service life.Therefore, the 2BPzB battery is widely recognized as an excellent energy storage solution for material handling equipment such as forklifts, pallet trucks, tractors, automated guided vehicles, as well as road vehicles and other electric vehicle fields requiring high energy and deep cycling. It is also suitable for scenarios requiring stable and reliable backup power sources such as solar power generation systems, providing long-lasting power support for diverse industrial and commercial applications.
