SHR10-12 bb battery12V40W
B.B. Battery SHR10-12S Series 12V Valve-Regulated Lead-Acid Battery, with an impact-resistant ABS plastic case, safe and leak-proof. This maintenance-free battery supports horizontal and vertical installation, is specially designed for high-rate discharge, provides high power output in short-time discharge mode, with a 15-minute discharge power of 40W per cell. It adopts AGM technology, has high gas recombination efficiency, and is expected to have a service life of up to 5-7 years. Suitable for UPS (Uninterruptible Power Supply), emergency lighting, security alarm systems, medical equipment, and backup power scenarios, it is an ideal choice for power solutions requiring high reliability.
Taobao store
WeChat procurement
Product Features
- Maintenance free(no water topping-up required)
- No free acid(Non-spillable battery)
- The battery is designed for high rate usage
- Can be used in any orientation(excluding used inverted)
- Absorbent Glass Mat technology for efficient gas recombination
- The power density at 2 min-15min discharging rate is 30% higher than BP series
- Flame-arrestor is installed to ensure safety
Application Scenarios
- Uninterruptible power supplies
- Medical equipment
- Emergency lighting and video surveillance systems
- Access control and management systems
- Telecommunication facilities
- Data processing centres
- Alternative energy sources
- Electrical supply network and power industry
- Alternative energy sources
- Electrical supply network and power industry
Product parameters
- ModelSHR10-12
- Voltage12 V
- Nominal capacity 15 minutes W/cell40
- Weight kg2.7
- Weight lbs5.95
- Standard terminal typeT2
- Standard terminal position-
- Optional terminal typeT1 B0
- Optional terminal position-
- Length mm151
- Length inches5.94
- Width mm65
- Width inches2.56
- Height mm94
- Height inches3.7
- Overall height mm100
- Overall height inches3.94
Product details
The SHR10-12 Type 12V Valve-Regulated Sealed Lead-Acid Battery is a high-performance product in the B.B. Battery SHR series, specifically designed for application scenarios requiring high-power output and reliable backup power. This battery adopts a sturdy, opaque, impact-resistant ABS plastic case, with the battery cover firmly connected to the case and the terminal area well-sealed, ensuring overall structural stability and safety. Its terminal design varies according to the specific model; the battery cover is equipped with six electrolyte filling holes for the production process, and after completion, a pressure relief valve made of non-combustible material is installed, which significantly enhances the battery's fire and explosion protection safety level.
Inside the battery, both positive and negative plates are coated with a special paste-like coating, combined with the absorbed glass mat (AGM) technology to achieve efficient gas recombination, enabling the battery to truly meet the maintenance-free standard. No water refill is required throughout its entire service life, while ensuring no free acid, making it a reliable leak-proof battery. One prominent advantage of SHR10-12 is its flexible installation method; the battery supports horizontal and vertical installation (inversion is prohibited), providing great convenience for the spatial layout inside various devices. In terms of performance, it is specifically designed for high-rate discharge and can provide extremely high specific output power in short-time discharge modes. Specifically, it discharges to 1 per cell in 15 minutes.The power can reach 40 watts per cell at 3V, recommended for scenarios where backup time does not exceed 60 minutes. Compared to similar products, its power density is 50% higher at discharge rates of 2 to 15 minutes, enabling rapid response to high-power demands.
In terms of technical parameters, the nominal voltage of SHR10-12 is 12V, with a weight of approximately 2.7 kilograms (5.95 pounds). Its dimensions are length 151 mm (5.94 inches), width 65 mm (2.56 inches), height 94 mm (3.7 inches), with an overall height of 100 mm (3.94 inches). The standard terminal type is T2, providing users with a reliable connection option.SHR series batteries have a long service life under normal usage conditions, with an expected service life of 5 to 7 years. According to the Eurobat standard, its designed service life can reach 10 years. The capacity range covers 3.6 to 24 ampere-hours, and the power per battery covers 78 to 576 watts, with specific values depending on different discharge rate conditions such as C2, C10, etc.
This makes SHR10-12 an ideal power solution for numerous critical systems. It is very suitable for low-power uninterruptible power supply systems, fire and safety alarm systems, emergency lighting, and security monitoring systems, ensuring safe operation.Meanwhile, it is also widely used in access control, various medical devices, laboratory instruments, and as a reliable energy source for fishing lamps, toy cars, and battery packs. Additionally, this battery can serve as a backup or main power source for power grids, power industry facilities, rural estates, hotels, shops, and EV-related equipment, demonstrating broad application adaptability.
