MPL100-12Standard bb battery12V400AH
B.B. Battery MPL100-12 Standard is a 12V valve-regulated lead-acid (VRLA) battery with a nominal capacity of 100Ah and a design service life of up to 12 years. It features an impact-resistant ABS shell, supports horizontal and vertical installation, and requires no maintenance. Its extremely low internal resistance design provides excellent high-power output, making it suitable for applications such as UPS (uninterruptible power supply), data centers, telecommunications, emergency lighting, security systems, and solar energy storage. It is an ideal choice for small and medium-sized backup power systems.
Taobao store
WeChat procurement
Product Features
- Maintenance free(no water topping-up required)
- No free acid(Non-spillable battery)
- Flame-arrestor is installed to ensure safety
- Can be used in any orientation(excluding used inverted)
- Absorbent Glass Mat technology for efficient gas recombination
- The battery is designed with very lower resistance and exceeding high power performance
- Long life expectancy 10 years in float application
Application Scenarios
- Uninterruptible power supplies
- Medical equipment
- Emergency lighting and video surveillance systems
- Access control and management systems
- Telecommunication facilities
- Data processing centres
- Alternative energy sources
- Electrical supply network and power industry
- Alternative energy sources
- Electrical supply network and power industry
Product parameters
- ModelMPL100-12 Standard
- Voltage12 V
- Nominal capacity 15 minutes/Wh per cell400
- Nominal capacity 10-hour rate Ah-
- Weight kg30.2
- Weight lbs66.6
- Standard terminal typeB3
- Standard terminal position8
- Optional terminal typeI2
- Optional terminal position-
- Length mm306
- Length inches12.05
- Width mm173
- Width inches6.81
- Height mm200
- Height inches7.87
- Thickness mmB3:230, I2:207
- Thickness inchesB3:9.06, I2:8.15
- -
Product details
MPL100-12 Standard is a 12V integral valve-regulated lead-acid (VRLA) battery from B.B. Battery's MPL series. This battery features a solid, opaque, impact-resistant ABS plastic case with a firmly connected battery cover and reliably sealed terminal area, ensuring safety and stability in various application environments. The six holes on the battery cover are used for electrolyte filling during the production process, followed by installing a pressure relief valve made of non-combustible materials, which provides a high level of fire and explosion safety protection for the battery, making it an ideal choice for high-requirement scenarios such as data centers, power supply networks, and telecommunications facilities.
In terms of performance, the MPL100-12 Standard battery is specially designed for medium and low power uninterruptible power supplies (UPS). It can provide high specific output power in short-distance discharge mode and is especially suitable for applications with a maximum backup time of 60 minutes. Its extremely low internal resistance design brings excellent high-power performance, meeting the instantaneous power requirements of emergency lighting, video surveillance systems, access control management systems, and medical equipment. The battery supports horizontal and vertical installation and is equipped with a carrying handle for flexible deployment in various spaces, but note that it is forbidden to use it upside down.
The positive and negative plates of the battery are coated with a paste - like coating, and it adopts Absorbed Glass Mat (AGM) technology to achieve efficient gas recombination, ensuring the battery is maintenance - free throughout its service life without the need for water replenishment. Additionally, the design without free acid makes it a reliable leak - proof battery. Under normal operating conditions, the expected service life of this series of batteries can reach 12 years, providing reliable power support for renewable energy systems (such as solar and wind energy) in fields like oil and gas extraction, rural estates, hotels and shops, and even electric vehicles.
In terms of specific parameters, the MPL100 - 12 Standard has a nominal voltage of 12V, and the single - cell Wh capacity at the 15 - minute rate is 400. Its weight is approximately 30.2 kg (66.6 lbs), with dimensions of length 306 mm (12.05 inches), width 173 mm (6.81 inches), and height 200 mm (7.87 inches). The battery offers two terminal types: B3 and I2. The standard configuration is the B3 terminal, located at position 8, with a thickness of approximately 230 mm (9.06 inches); if the I2 terminal is selected, the thickness is 207 mm (8.15 inches). The entire MPL series has a capacity range from 55 to 155 Ah, which can meet the complex requirements of various loads and backup times in different fields, from telecommunications facilities to the power industry.
.png)
